Kata Kunci
safety factor
sultan wind turbine
topology optimization
Abstrak
Sultan wind turbine is one of the products of the New Renewable Energy Engineering Lab, Faculty of Engineering Untirta which has developed from year to year until now. To keep up with industrial developments in today's era, renewal is needed to improve and update the technology contained in the sultan wind turbine. In particular, today's optimization topologies are seen as providing the possibility to realize truly manufacturing-optimized designs through topology optimization. A topological optimization is an approach that is considered powerful in design because it contributes to designs that can save energy, materials ,and time that cannot be achieved economically using other manufacturing processes. A topological optimization, as it is often called, computer configuration of the best material over 3D space, usually represented as a grid, to satisfy or optimize physical parameters. Designers using these automated systems often seek to understand the interaction of physical constraints with the final design and their implications for other physical characteristics. Such understanding is a challenge to using a visualization approach to explore the design solution space. The essence of our new approach is to summarize an ensemble of solutions by automatically selecting a set of examples and parameterizing a design space.
Referensi
Alexander, I., & Beus-Dukic, L. (2008). Requirements Engineering Education and Training, 2008. REET ’08. IEEE.
Alexander, I., & Beus-Dukic, L. (2009). Discovering Requirements How to Specify Products and Services.
Armentani, E., Giannella, V., Parente, A., & Pirelli, M. (2020). Design for NVH: Topology optimization of an engine bracket support. Procedia Structural Integrity, 26, 211–218. https://doi.org/10.1016/j.prostr.2020.06.024
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021). Metal additive manufacturing in aerospace: A review. Materials and Design, 209. https://doi.org/10.1016/j.matdes.2021.110008
Collet, M., Bruggi, M., & Duysinx, P. (2017). Topology optimization for minimum weight with compliance and simplified nominal stress constraints for fatigue resistance. Structural and Multidisciplinary Optimization, 55(3), 839–855. https://doi.org/10.1007/s00158-016-1510-6
Cuillière, J. C., François, V., & Nana, A. (2018). Automatic construction of structural CAD models from 3D topology optimization. Computer-Aided Design and Applications, 15(1), 107–121. https://doi.org/10.1080/16864360.2017.1353726
Dolmatov, S. N., & Kolesnikov, P. G. (2020). Topological optimization by designing structural elements of logging machine manipulators. Journal of Physics: Conference Series, 1515(4). https://doi.org/10.1088/1742-6596/1515/4/042003
Egi, M. (2017). PERANCANGAN KERANGKA DUDUKAN PADA PROTOTIPE SULTAN WIND TURBINE V.4.
Fakultas Teknik. (2020, August 31). Metode Optimasi Topologi Struktural. Universitas Medan Area.
Herrero-Pérez, D., Picó-Vicente, S. G., & MartÃnez-Barberá, H. (2022). Efficient distributed approach for density-based topology optimization using coarsening and h-refinement. Computers and Structures, 265. https://doi.org/10.1016/j.compstruc.2022.106770
Huang, X., & Li, W. (2022). Three-field floating projection topology optimization of continuum structures. Computer Methods in Applied Mechanics and Engineering, 399, 115444. https://doi.org/10.1016/j.cma.2022.115444
Huang, X., Zhou, S., Sun, G., Li, G., & Xie, Y. M. (2015). Topology optimization for microstructures of viscoelastic composite materials. Computer Methods in Applied Mechanics and Engineering, 283, 503–516. https://doi.org/10.1016/j.cma.2014.10.007
Kalantre, V., Munde, K. H., & Pawar, A. (2018). Topology Optimization of Front Leaf Spring Mounting Bracket. 3(7), 12–19.
Kang, J., Dong, E., Li, X., Guo, Z., Shi, L., Li, D., & Wang, L. (2021). Topological design and biomechanical evaluation for 3D printed multi-segment artificial vertebral implants. Materials Science and Engineering C, 127. https://doi.org/10.1016/j.msec.2021.112250
Kim, G. W. P. and Park. K. (2020). Topology Optimization And Additive Manufacturing Of Automotive Component By Coupling Kinetic And Structural Analyses. International Journal of …, 13(2), 293–300. https://doi.org/10.1007/s12239
Koirala, R., Aacharya, A., & Chitrakar, S. (2021). Structural optimization of simple span bridge by adding truss structure. 15(2), 5–10.
Li, H., Gao, L., Li, H., Li, X., & Tong, H. (2021). Full-scale Topology Optimization for Fiber-reinforced Structures with Continuous Fiber Paths.
Maria, R. (2016). Summary Of Safety Criteria In Design. Automotive Engineering Research Group (AERG), 10(May), 23–37. https://doi.org/10.13140/RG.2.1.1501.5285
Meena, V. K., Kumar, P., Kalra, P., & Sinha, R. K. (2021). Additive manufacturing for metallic spinal implants: A systematic review. Annals of 3D Printed Medicine, 3, 100021. https://doi.org/10.1016/j.stlm.2021.100021
Nandanwar, T., Waghela, K., Gupta, E., & Narendiranath Babu, T. (2021). Topology Optimization of the Bell Crank & Brake Pedal. IOP Conference Series: Materials Science and Engineering, 1123(1), 012035. https://doi.org/10.1088/1757-899x/1123/1/012035
Perry, D. J., Keshavarzzadeh, V., Y Elhabian, S., Kirby, R. M., Gleicher, M., & Whitaker, R. T. (2020). Visualization of topology optimization designs with representative subset selection. ArXiv E-Prints, arXiv:2012.14901.
Pilagatti, A. N., Piscopo, G., Atzeni, E., Iuliano, L., & Salmi, A. (2021). Design of additive manufactured passive heat sinks for electronics. Journal of Manufacturing Processes, 64, 878–888. https://doi.org/10.1016/j.jmapro.2021.01.035
Pollak, M., Kascak, J., Torokova, M., Kocisko, M., & Dobransky, J. (2020). Topological Optimization of a Supporting Part of a 3D Printer Pad. Manufacturing Technology, 20(4), 492–499. https://doi.org/10.21062/mft.2020.067
Roque, R., Barbosa, G. F., & Guastaldi, A. C. (2021). Design and 3D bioprinting of interconnected porous scaffolds for bone regeneration. An additive manufacturing approach. Journal of Manufacturing Processes, 64, 655–663. https://doi.org/10.1016/j.jmapro.2021.01.057
Sippa, S. (2019). ). Rencana Program Dan Investasi Infrastruktur Jangka Menengah Kota Cilegon BAB IV. In Rencana Program Dan Investasi Infrastruktur Jangka Menengah Kota Cilegon.
Siva Rama Krishna, L., Mahesh, N., & Sateesh, N. (2017). Topology optimization using solid isotropic material with penalization technique for additive manufacturing. Materials Today: Proceedings, 4(2), 1414–1422. https://doi.org/10.1016/j.matpr.2017.01.163
Suryo, S. H., Sastra, R. S., Muchammad, & Harto. (2021). Optimization of bucket tooth excavator design using topology optimization and finite element method. Journal of Physics: Conference Series, 1858(1). https://doi.org/10.1088/1742-6596/1858/1/012081
Tyflopoulos, E., Flem, D. T., Steinert, M., & Olsen, A. (2018). State of the art of generative design and topology optimization and potential research needs. Proceedings of NordDesign: Design in the Era of Digitalization, NordDesign 2018, 1–15.
Ullman, David. G. (2017). Opto-mechanical design process. In Fourth Edition: Opto-Mechanical Systems Design: Design and Analysis of Opto-Mechanical Assemblies (Vol. 1). https://doi.org/10.1201/b18147
Wang, Z., Zhang, Y., & Bernard, A. (2021). A constructive solid geometry-based generative design method for additive manufacturing. Additive Manufacturing, 41. https://doi.org/10.1016/j.addma.2021.101952
Yan, X., Bao, D., Zhou, Y., Xie, Y., & Cui, T. (2022). Detail control strategies for topology optimization in architectural design and development. Frontiers of Architectural Research, 11(2), 340–356. https://doi.org/10.1016/j.foar.2021.11.001
Authors who publish in PENA TEKNIK: Jurnal Ilmiah Ilmu-ilmu Teknik agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.