Abstract
Work accidents are one of the serious problems that have a direct impact on worker safety and company productivity. This study was conducted at PMKS PT. Sisirau located in Aceh Tamiang. This research aims to explore potential sources of danger, evaluate the degree of associated threats, and formulate strategic preventive measures through the structured framework of Hazard Identification, Risk Assessment, and Control Determination (HIRADC) method. The focus of this study was on three work stations, namely loading ramp, boiling (sterilizer station), and tipler. The data used were in the form of work accident reports from January 2021 to February 2025, as well as the results of observations and interviews in the field. The results of the study showed that there were a total of 18 work activities identified as hazardous, consisting of 8 activities at the loading ramp station, 5 activities at the boiling station (sterilizer), and 5 activities at the tipler station. The results of the risk assessment showed that at the loading ramp station there were 5 activities with One activity presented moderate risk; three others showed low-risk potential. At the boiling station (sterilizer) there were 4 activities with a moderate risk and 1 activity with a low risk. Meanwhile, at the tipler station, among the evaluated activities, one was determined to involve a significant risk factor, whereas two others presented comparatively lower levels of risk, and 2 activities with low risk. Recommended risk control includes 7 activities with engineering control, 9 activities with administrative control, and 10 activities with mandatory Application of individual safety gear.
References
Ahnaf. (2024). Analysis of potential hazards using the JSA and Hirarc methods in the Civil and Electrical Department of PT. ABC. Identification of potential hazards using the JSA and Hirarc method in the Civil and Electrical Department of PT. ABC. 7.
Anizar, A., & Fandya, RA Al. (2022). Analysis of Potential Hazards at Loading Ramp and Boiling Stations Using the Job Safety Analysis (JSA) Method TALENTA Conference Series Analysis of Potential Hazards at Loading Ramp and Boiling Stations Using the Job Safety Analysis (JSA) Method. 5(2), 0–5. https://doi.org/10.32734/ee.v5i2.1560
Ariana, IKA, Wismantara, IGNN, Riana, IN, Galang, IN, & Wibawa, S. (2025). Analysis of Occupational Health and Safety Risk Management in Construction Projects (Case Study: Undiknas Building C Block 2 Construction Project). ITP Civil Engineering Journal, 12(1), 60–69. https://doi.org/10.21063/JTS.2025.V1201.060-069
Budiman, A., Isa, M., & Soekiswati, S. (2025). Risk Analysis and Preventive Measures for Leakage of Electronic Patient Medical Records Data at RS P Surakarta. Ranah Research: Journal of Multidisciplinary Research and Development, 7(3), 2118–2127. https://doi.org/10.38035/rrj.v7i3.1421
Caesar, DL, Sholikhah, F., & Mubaroq, MH (2023). Analysis of Potential and Risk Assessment of Workplace Hazards in Jepara Furniture Companies. 3(2), 103–114.
Farras, Jumhana, E., AnisFadilah, Adha, Novrio, Anugrah, MJ, Haki, & Ubay. (2025). Occupational safety and health (OSH): a key pillar in productivity and sustainability. 4(1), 619–633. https://doi.org/10.53363/bureau.v5i1.548
Gufron, A., & Rusindiyanto. (2025). Analysis of the Application of the HIRADC Method as an Effort to Control Hazard Risks in the Calibration Laboratory of PT XYZ. Serambi Engineering, X(1), 12036–12049.
Hasiany, S., Difa, GF, Awan, FN, & Prasetio, B. (2024). Risk Analysis Using the HIRADC (Hazard Identification Risk Assessment and Determining Control) Method at the Palm Oil Processing Factory of PT. Perkebunan Nusantara VII, Bekri Unit, Central Lampung. 8(1), 1–5.
Ihsan, T., Sajidah, H., Edwin, T., & Derosya, V. (2025). Identification and Control of OHS Risks in the CPO Production Process using the HIRARC Method. 11(1), 120–130.
Ilmi, N. (2025). Analysis of Occupational Health and Safety Risks in the Palm Oil Processing Industry Using the HIRARC Method. Journal of Industrial Systems Engineering and Management, 4(1), 21–26.
Kurnia, TAF, & Apsari, AE (2023). Analysis of Work Accident Risk in the Milling Station Section at PT Sinergi Gula Nusantara (PG Madiun) Using the Job Safety Analysis (JSA) and Hierarch (Hazard Identification Risk Assessment & Risk Control) Methods. Case Study at PT Sinergi Gula Nusantara. 3(2), 180–191.
Nugraha, H., & Yulia, L. (2021). Analysis of the Implementation of Occupational Safety and Health Programs in an Effort to Minimize Work Accidents among Employees of PT Kereta Api Indonesia (Persero). 10(2), 93–102.
Palaniandy, Y., Adam, N.M., Hung, Y.P., & Naning, F.H. (2020). Potential of Steam Recovery from Excess Steam in Sterilizer at Palm Oil Mill. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79(1), 17–26. https://doi.org/10.37934/ARFMTS.79.1.1726
Parentai, ROL, Banteng, BSD, & Sumaga, AU (2025). Occupational Safety and Health Risk Analysis Using the HIRARC Method (Case Study of the IAIN Sultan Amai Gorontalo Lecture Building Construction Project). Multidisciplinary Scientific Journal, 3(2).
Ramadhania, M., Saputra, N., Herdiansyah, D., & Dihartawan. (2021). Analysis of Hazard Identification, Risk Assessment, Determining Control (Hiradc) in Work Activities at Ud Ridho Abadi, South Tangerang in 2021. Environmental Occupational Health and Safety Journal, 2(1), 59–68.
Saputro, T., & Lombardo, D. (2021). Hazard Identification, Risk Assessment and Determining Control (HIRADC) Method in Controlling Risk at PT. Zae Elang Perkasa. Journal of Bolts and Manufacturing, 03(1), 23–29.
Subandri, AP, & Prabowo, HA (2020). Analysis of Occupational Safety and Health Risk Management Using the Hazard Identification, Risk Assessment, and Risk Control (HIRARC) Method at the Reformed Millenium Center of Indonesia Abstract. 2(July), 51–63.
Sulistyaningtyas, N. (2025). Analysis of Factors Causing Work-Related Accidents in Construction Workers: Literature Review. 1(1).
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Copyright (c) 2025 Latifa Ummarah